| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Martin nut http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=2358 |
Page 1 of 1 |
| Author: | bob J [ Sun Jul 03, 2005 1:45 am ] |
| Post subject: | |
Is the Stu/Mac bone nut for Martin (angled sides and bottom the correct one to use for Martin style guitars? |
|
| Author: | crazymanmichael [ Sun Jul 03, 2005 3:35 am ] |
| Post subject: | |
it is if you configure your neck in the exact same manner as martin around the headstock/nut/shaft area. as for the commercial martin lookalikes it depends on whether they have copied exactly or not. as i make my nuts from blanks to fit the slot it is never an issue for me. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|